此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

Design of driving wheel speed test device based on magnetoelectric sensor

HOU Zhi-wei, CHEN Chang-xin, MA Tie-hua, WANG Yu, JIAO Bin

 

(1. Science and Technology on Electronic Test & Measurement Laboratory, North University of China, Taiyuan 030051,  China; 2. School of Electrical and Control Engineering, North University of China, Taiyuan 030051, China)

 

Abstract: In order to study the transmission efficiency of engine and optimize the structure of driving wheel, the rotational speed storage test device of driving wheel in tracked vehicle based on magnetoelectric sensor was designed. The device consisted of a mounting bracket, a sensor and a tester. The mounting bracket was installed in vehicle body after fixing the tester and sensor to mounting bracket beside the driving wheel. Using the storage test instrument, the wireless trigger technology was applied to synchronously record and stored the rotational speed data of the driving wheel in tracked vehicle. After the experiment was finished, the data was read out through the upper computer. Both valid data and satisfactory results were obtained through both simulated and actual vehicle tests.

 

Key words: tracked vehicle; storage test; driving wheel test; magnetoelectric sensor

 

CLD number: TP212                doi: 10.3969/j.issn.1674-8042.2020.02.011

 

References

 

[1]Lei Y G. Tracked vehicles travel system dynamics simulation and research on rubbering track key parts. Harbin: Harbin Institute of Technology, 2016.
[2]Yang J Y. Research on information acquisition technology of tracked vehicle drive wheel. Taiyuan: North University of China, 2018.
[3]Liu L X. Rotation speed and torque test system for vehicle. Instrument Technique and Sensor, 2010, (7): 89-91.
[4]Bai R, Pei D X, Xie R. Researching on the embedded stress test system of vehicle driving wheel. Chinese Journal of Electron Devices, 2016, 39(3): 746-749.
[5]Ye J. Development of multi-functional measuring Instrument for rotating speed. Tianjin: Tianjin University, 2012.
[6]Luan J Y, Yang J Y, Jin H. Research on torque test system of transmission shaft based on wheel spoke strain extraction. Automation & Instrumentation, 2018, 33(10): 50-54.
[7]Wang H Q. Rotating equipment’s high speed, high torque test engineering research. Chongqing: Chongqing Jiaotong University, 2009.
[8]Wei Y F, Xie R, Deng H F, et al. Design of mechanical transmission parameter test system based on wireless configuration and retriggering. Instrument Technique and Sensor, 2019, (2): 82-85.
[9]Yang J E, Meng Z D, Yang G P, et al. Speed measurment technology using differential hall transducer. Instrumentation Technology, 2010, (10): 66-70.
[10]Wang J Y. Design and research of hall sensor rotational speed detection system. Harbin: Heilongjiang University, 2010.
[11]Li H X. Application of sensor in rotational speed measurement. Management & Technology of SME, 2014, (10): 193.
[12]Xu G W, Song C H. Optimization design on magnetoelectric rotational speed sensor. Transducer and Microsystem Technologies, 2013, 32(2): 93-95.
[13]Wang H, Zhao X Y, Zhao G, et al. Research on wide-band measurings rotation speed system based on magnetoelectric rotational speed sensor. Instrument Technique and Sensor, 2017, (3): 86-89.
[14]Ren J B. Study on the reduce vibration of brushless DC air-pump based on vehicles. Fuzhou: Fujian Agriculture and Forestry University, 2009.
[15]Liu C X, Li J, Zhang F, et al. Research on hull vibration characteristics of a tracked vehicle and vibration reduction solutions for its sprocket. Vehicle and Power Technology, 2013, (2): 35-37.


基于磁电传感器的主动轮转速测试装置设计

 

侯志伟, 陈昌鑫, 马铁华, 王  宇, 焦  斌

 

  (1.中北大学 电子测试技术重点实验室, 山西 太原 030051;2. 中北大学 电气与控制工程学院, 山西 太原 030051) 

 

摘  要:  为了研究发动机的传递效率, 以及对主动轮的结构进行优化, 设计了基于磁电传感器的履带车辆主动轮转速存储测试装置。 该装置由安装支架、 传感器和测试仪三部分组成, 将测试仪和传感器固定于主动轮旁边的安装支架后将安装支架固定到车体。 使用存储测试仪器, 采用无线触发技术, 将履带车辆主动轮的转速数据同步记录存储, 实验结束后将数据通过上位机读取出来。 通过模拟实验和实车试验均取得了有效数据和满意结果。

 

关键词:  履带车辆; 存储测试; 主动轮转速; 磁电传感器

 

引用格式:  HOU Zhi-wei,  CHEN Chang-xin,  MA Tie-hua,  et al. Design of driving wheel speed test device based on magnetoelectric sensor. Journal of Measurement Science and Instrumentation, 2020, 11(2): 186-192. [doi: 10.3969/j.issn.1674-8042.2020.02.011]

 

[full text view]