XIAO Wei, HU Guo-sheng, ZHANG Jing-ting, LIU Bing-xiao
(Institute of Macro-Molecules & Bio-Engineering， North University of China， Taiyuan 030051， China )
Abstract： Researches about synthesis and modification of nylon 10T (PA10T) in domestic universities and scientific research institutions are reviewed in this paper. The results show that, due to the different performance requirements, PA10T is studied from the co-polymerization, blending modification and filling modification of these three aspects. Meanwhile, the existing problems are analyzed and the development prospect of PA10T is predicted.
Key words： PA10T; high temperature resistant nylon; material modification
CLD number： TQ323.6 Document code： A
Article ID： 1674-8042（2018）01-0092-06 doi： 10.3969/j.issn.1674-8042.2018.01.014
References
［1］ Novitsky T F, Lange C A, Mathias L J, et al. Eutectic melting behavior of poly-amide 10,T-co-6,T and 12,T-co-6,T copolyterephthalamides. Polymer, 2010, 51(11): 2417-2425.
［2］ Monson L, Braunwarth M, Extrand C W. Moisture absorption by various poly-amides and their associated dimensional changes. Journal of Applied Polymer Science, 2008, 107(1): 355-363.
［3］ Hewel M. Semiaromatic polyamide molding compositions and their use. US: US7927710, 2011.
［4］ Sawpan M A, Holdsworth P G, Renshaw P. Glass tran-sitions of hygrothermal aged pultruded glass fibre reinforced polymer rebar by dynamic mechanical thermal analysis. Materials & Design, 2012, 42(42): 272-278.
［5］ Cao M, Zhang M Q, Huang X B, et al. Synthesis and characterization of poly (decamethylene terephthalamide). Petroleum Chemical Industry, 2008, 37(7): 714-717.［6］ Wang W Z, Zhang Y H, Yin G J. Preparation and thermal stability of poly (decamethylene terephthalamide). Synthesis and Application of Materials, 2009, 38(2): 14-17.
［7］ Wang W Z, Li R X, Liu B Y, et al. Study on the prep-aration and non-isothermal crystallization kinetics of benzene dimethyl decaniline. Guangzhou Chemistry, 2009, 34(1): 1-6.
［8］ Shi Z G. PA10T and its copolymer synthesis and char-acterization. Mianyang: Southwest University of Science and Technology, 2012.
［9］ Liu Y C, Li Y C, Qu Z, et al. Synthesis and chara-cterization of PA10T/11 copolyamide with heat resistance. Plastic Industry, 2012, 40(10): 20-23.
［10］ Liu Y C. Synthesis and characterization of PA10T/11 semi aromatic copolyamide with heat resistance. Taiyuan: North University of China, 2013.
［11］ Qu Z. Synthesis and Characterization of PA10T and the copolymer PA10T/11. Taiyuan: North University of China, 2014.
［12］ Ma Y H. Study on the interfacial polymerization tech-nology of semiaromatic polyamide PA10T, PA12T and PA6T. Zhengzhou: Zhengzhou University, 2013.
［13］ Yi Q F, Jiang S J, Zeng X B, et al. Property chara-cterization of PA10T/PA6T/66 alloy with different ratio. Plastic Industry, 2014, 42(5): 50-52.
［14］ Yi Q F, Zhao Z Y, Jiang S J, et al. Study on the dis-persion of spherical alumina filled in PA10T and the effect to properties of composites. Plastic Industry, 2015, 43(8): 112-114.
［15］ Song H S, Wang M, Lu X F, et al. Effects of thermal-oxidative aging on static and dynamic mechanical properties of long Glass fiber reinforced nylon 10T composites. Chinese Journal of Composites, 2016, 33(10): 2158-2165.
［16］ Song J L, Qu J, Guo J B. Thermal-oxidative aging properties of flame-retardant glass fiber reinforced PA10T composites. Engineering Plastics, 2016, 44(8): 93-96.［17］ Mai J H, Yi Q F, Jiang Z Q, et al. Research on the properties of PA10T thermal conductive composites. Plastic Industry, 2011, 39(12): 120-123.
［18］ Jiang Z Q, Yi Q F, Mai J H, et al. Effects of boron nitride and magnesium oxide compound thermal insulation on the properties of PA10T composites. China Plastics, 2012, 26(10): 46-49.
［19］ Yi Q F, Long J M, Chen J, et al. Study on the flame retardancy of halogen free flame retardant and reinforced poly (decamethylene terephthalamide). Plastic Industry, 2011, 39(9): 28-30.
［20］ Yi Q F, Jiang S J, Chen J, et al. Study on mechanical property and thermal stability of non-halogen flame retardant PA10T. Engineering Plastics Application, 2012, 40(1): 28-31.
［21］ Luo X A. Study on rheological properties of PA10T. Plastics Industry, 2009, 37(A02): 36-38.
［22］ Long J M, Cao M, Jiang S J. Analysis of volatile components in PA10T resin by combining dynamic headspace Sampling with GC-MS. Plastic Industry, 2012, 40(1): 61-63.
［23］ Duemichen E, Braun U, Kraemer R, et al. Thermal extraction combined with thermal desorption: A powerful tool to investigate the thermo-oxidative degradation of poly-amide 66 materials. Journal of Analytical & Applied Pyrolysis, 2015, 115: 288-298.
［24］ Wen J J, Yi Q F, Ma J H, et al. Crystallization kinetics of poly (decamethylene terephthalamide) (PA10T). Materials Science and Engineering, 2014, 30(1): 72-77.
耐高温尼龙10T的研究进展
肖 伟， 胡国胜， 张静婷， 刘冰肖
（中北大学 高分子与生物工程研究所， 山西 太原 030051）
摘 要: 本文按时间顺序综述了国内有关高校及科研机构对聚对苯二甲酸癸二胺（PA10T）的合成及改性研究情况。 结果表明： 出于对某种特定性能的需求， 研究主要从共聚改性、 共混改性及填充改性三个方面着手。 分析了研究存在的问题， 并对PA10T的发展前景进行了分析和展望。
关键词: PA10T； 耐高温尼龙； 材料改性
引用格式： XIAO Wei, HU Guo-sheng, ZHANG Jing-ting, et al. Research progress of high temperature resistant nylon 10T. Journal of Measurement Science and Instrumentation, 2018, 9(1)： 92-97. ［doi： 10.3969／j.issn.1674-8042.2018.01.014］
[full text view]
