YAN Lu, WANG Guan-jun, AN Yong-quan, WANG Zhi-bin， GUI Zhi-guo
（School of Information and Communication Engineering， North University of China, Taiyuan 030051， China.）
Abstract： Transmission characteristics of the side polished fiber were studied by experimental method. The side polished fibers with different depth and length were implemented, and the corresponding wavelength dependent loss was measured. Based on wheel fabrication, the side polished fibers were achieved with the low insertion loss and cost. Meanwhile, they can be artificially controlled for the use of evanescent field area and easy to system integration.
Key words： side polished fiber; optical fiber sensing; attenuation of optical power
CLD number： TN253Document code： A
Article ID： 1674-8042（2016）02-0145-04 doi： 10.3969/j.issn.1674-8042.2016.02.008
References
［1］Chiu M H, Chiu P C, Hsien L Y, et al. Multimode D-type optical fiber sensor based on ATR effect in temperature detection. Sensors & Transducers, 2009, 111(12): 125-131.
［2］LIU Lin-he, CHEN Zhe, BAI Chun-he, et al. The effect of refractive index of material overlaid side polished area of FBG on Bragg wavelength. Acta Photonica Sinica, 2007, 36 (5): 865-868.
［3］ZHANG Yun-cong, CHEN Zhe, JIANG Pei-fan, et al. All-fiber thermooptical variable optical attenuator. Chinese Journal of Lasers, 2007, 34(8): 1110-1114.
［4］XIAO Ya-ting, CHEN Zhe, ZHANG Ling-tong, et al. All fiber online optical power monitor based on side-polished fiber. Journal of Applied Optics, 2010, 31(4): 620-625.
［5］Slavik R, Homola J, Ctyroky J, et al. Novel spectral fiber optic sensor based on surface plasmon resonance. Sensors and Actuators B: Chemical, 2001, 74(1): 106-111.
［6］Piliarik M, Homola J, Manikova Z, et al. Surface plasmon resonance sensor based on a single-mode polarization-maintaining optical fiber. Sensors and Actuators B: Chemical, 2003, 90(1): 236-242.
［7］JING Ning, TENG Chuan-xin, YU Fang-da, et al. Temperature dependence of a refractiveindex sensor based on side-polished macrobending plastic optical fiber. IEEE Sensors Journal, 2016, 16(2): 355-358.
［8］Santos D F, Guerreiro A, Baptista J M. Numerical investigation of a refractive index SPR D-Type optical fiber sensor using COMSOL multiphasics. Photonic Sensors, 2013, 3(1): 61-66.
［9］Qazi H H, Mohammad A B, Ahmad H, et al. Single-mode D-shaped optical fiber sensor for the refractive index monitoring of liquid. Journal of Modern Optics, 2016, 63(8): 750-755.
［10］Maler S A. Plasmonics: fundamentals and applications. New York: Springer Science & Business Media, 2007.
［11］Ong Y S, Kam W, Harun S W, et al. Low-cost transducer based on surface scattering using side-polished D-shaped optical fibers. IEEE Photonics Journal, 2015, 7(5): 1-10.
［12］CHEN Zhe, LIU Lin-he. Temperature compensation of fiber bragg grating based on side polishing and overlay. Chinese Journal of Lasers, 2008, 35(6): 889-892.
［13］JIANG Pei-fan, CHEN Zhe, ZENG Ying-xin, et al. Investigations on optical transmitting characters of side-polished fibers. Semiconductor Opto-Electronic, 2006, 27(5): 578-581.
［14］Jung J H, Kim M W. Optimal design of fiber-optic surface plasmon resonance sensor. Journal of the Optical Society of Korea, 2007, 11(2): 55-58.
［15］Dwivedi Y S, Sharma A K, Gupta B D. Influence of design parameters on the performance of a surface plasmon sensor based fiber optic sensor. Plasmonics, 2008, 3(2-3): 79-86.
［16］Sharma A K, Mohr G J. On the performance of surface plasmon resonance based fibre optic sensor with different bimetallic nanoparticle alloy combinations. Journal of Physics D: Applied Physics, 2008, 41(5): 055106.
侧边抛膜光纤传输特性的研究
严璐， 王冠军， 安永泉， 王志斌， 桂志国
（中北大学 信息与通信工程学院， 山西 太原 030051）
摘要： 本文通过实验的方法了解侧边抛磨光纤的传输性能， 深度研究了不同抛磨深度、 不同抛膜长度的侧边抛磨光纤， 测量了不同抛磨深度光纤存在着波长相关损耗。 本文利用轮式侧边抛磨法制作侧边抛磨光纤， 具有插入损耗较低、 成本低廉、 可人为控制对倏逝场区域的利用、 易于系统集成等特点。
关键词： 侧边抛膜光纤； 光纤传感； 传输特性
引用格式：YAN Lu, WANG Guan-jun, AN Yong-quan, et al. Research on transmission character of side polished fiber. Journal of Measurement Science and Instrumentation, 2016, 7(2)： 145-148. ［doi： 10.3969／j.issn.1674-8042.2016.02.008］
[full text view]
