此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

Design of multi-channel equivalent system for IED based on Gigabit Ethernet transmission

CHENG Nai-peng, LI Jin-ming, HOU Tian-xi, CHENG Ya-li, MA Lin


(School of Instrument and Electronics, North University of China, Taiyuan 030051, China)

 

Abstract: To test the pulse signal of initiating explosive device (IED) in an aircraft, a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The output voltage of multi-channel equivalent circuit is converted by analog-to-digital converter (ADC). Then the validity of the converted signal is judged by field programmable gate array (FPGA). Finally, it is transmitted the host computer through Gigabit Ethernet for waveform displaying. Compared with the traditional equivalent equipment of IED, the designed system here can not only test the validity of the pulse signal and normal operation of equivalent circuit, but also realize fast and reliable analysis of pulse signal by means of Gigabit Ethernet. It solves the problems of low speed and lag of response of traditional equivalent equipment.


Key words: initiating explosive device (IED); equivalent circuit; Gigabit Ethernet

 

CLD number: TJ450.6           Document code: A


Article ID: 1674-8042(2019)01-0021-07    doi: 10.3969/j.issn.1674-8042.2019.01.004

 

References


[1] Zhang L L, Wu Y H, Zhang Y K, et al. Research electric parameter test of pyrotechnics. Journal of Astronautic Metrology and Measurement, 2018, 38(6): 87-90.
[2] Wei B H. Design of a test instrument for missile pyrotechnics. Journal of Weaponry and Equipment Engineering, 2018, 39(6): 20-23.
[3] Zhao J H, Cheng Y Y. Test circuit of explosive’s time. Electronic testing, 2010, (10): 72-75.
[4] Sun L, Ma A W, Guo C X, et al. Dynamic measurement of shutdown resistance of IED after function. Initiator & Pyrotechnics, 2007, (1): 54-56.
[5] Huang J B, Zi X Y, Liu G P. Design and Implementation on detonator testing unit of some missile. Journal of Missiles and Guidance, 2006, (S6): 393-395.
[6] Qin E Q. The 16 channel and high-speed data acquisition card’s design and implementation based on Gigabit Etherent. Zhengzhou: Zhengzhou University, 2014.
[7] Li Y, Yu W D, Hu X, et al. Design of Gigabit Ethernet data transmission system based on FPGA. Electronic Measurement Technology, 2015, 38(10): 72-77.
[8] Qiao W S. The design of external system equivalent device based on the Ethernet interface. Taiyuan: North University of China, 2013.
[9] Shi J H. Design of data acquisition system with multi-channel and multi-type. Taiyuan: North University of China, 2015.
[10] Hou T X, Li J M, Ma L, et al. Design of 128-channel data acquisition system based on eMMC. Application of Electronic Technology, 2017, 43(9): 76-79.

 

基于千兆以太网传输的多路火工品等效系统设计


成乃朋, 李锦明, 侯天喜, 成雅丽, 马  林


(中北大学 仪器与电子学院, 山西 太原 030051)


摘  要:  针对某飞行器中多路火工品起爆的脉冲信号及电路测试问题, 根据火工品电参数设计了一种基于千兆以太网传输的多路火工品时序等效系统。 系统以FPGA为测试平台, 对多路等效电路的输出电压进行模数转换, 并将转换后的信号进行有效性判断, 通过千兆以太网传输至上位机进行波形显示。 相比传统的火工品等效器, 该系统不仅能够测试脉冲信号的有效性及电路的正常工作, 也能够通过千兆以太网实现对脉冲信号的快速可靠性分析, 解决了传统等效器对脉冲信号响应低速、 滞后的问题。


关键词:  火工品; 等效电路; 千兆以太网

 

引用格式:  CHENG Nai-peng, LI Jin-ming, HOU Tian-xi, et al. Design of multi-channel equivalent system for IED based on Gigabit Ethernet transmission. Journal of Measurement Science and Instrumentation, 2019, 10(1): 21-27. [doi: 10.3969/j.issn.1674-8042.2019.01.004]

 

[full text view]